FV3 Bundle
mpp_sum_ad.inc
Go to the documentation of this file.
1 ! -*-f90-*-
2 
3 !***********************************************************************
4 !* GNU Lesser General Public License
5 !*
6 !* This file is part of the GFDL Flexible Modeling System (FMS).
7 !*
8 !* FMS is free software: you can redistribute it and/or modify it under
9 !* the terms of the GNU Lesser General Public License as published by
10 !* the Free Software Foundation, either version 3 of the License, or (at
11 !* your option) any later version.
12 !*
13 !* FMS is distributed in the hope that it will be useful, but WITHOUT
14 !* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 !* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 !* for more details.
17 !*
18 !* You should have received a copy of the GNU Lesser General Public
19 !* License along with FMS. If not, see <http://www.gnu.org/licenses/>.
20 !***********************************************************************
21 
22 !#######################################################################
23 
24  subroutine MPP_SUM_SCALAR_AD_( a, pelist )
25 !sums array a when only first element is passed: this routine just converts to a call to MPP_SUM_
26  MPP_TYPE_, intent(inout) :: a
27  integer, intent(in), optional :: pelist(:)
28  MPP_TYPE_ :: b(1)
29 
30  b(1) = a
31  if( debug )call mpp_error( NOTE, 'MPP_SUM_SCALAR_: calling MPP_SUM_ ...' )
32  call MPP_SUM_AD_( b, 1, pelist )
33  a = b(1)
34  return
35  end subroutine MPP_SUM_SCALAR_AD_
36 
37 !#######################################################################
38  subroutine MPP_SUM_2D_AD_( a, length, pelist )
39  MPP_TYPE_, intent(inout) :: a(:,:)
40  integer, intent(in) :: length
41  integer, intent(in), optional :: pelist(:)
42  MPP_TYPE_ :: a1D(length)
43 
44  pointer( ptr, a1D )
45  ptr = LOC(a)
46  call mpp_sum_ad( a1D, length, pelist )
47 
48  return
49  end subroutine MPP_SUM_2D_AD_
50 
51 !#######################################################################
52  subroutine MPP_SUM_3D_AD_( a, length, pelist )
53  MPP_TYPE_, intent(inout) :: a(:,:,:)
54  integer, intent(in) :: length
55  integer, intent(in), optional :: pelist(:)
56  MPP_TYPE_ :: a1D(length)
57 
58  pointer( ptr, a1D )
59  ptr = LOC(a)
60  call mpp_sum_ad( a1D, length, pelist )
61 
62  return
63  end subroutine MPP_SUM_3D_AD_
64 
65 !#######################################################################
66  subroutine MPP_SUM_4D_AD_( a, length, pelist )
67  MPP_TYPE_, intent(inout) :: a(:,:,:,:)
68  integer, intent(in) :: length
69  integer, intent(in), optional :: pelist(:)
70  MPP_TYPE_ :: a1D(length)
71 
72  pointer( ptr, a1D )
73  ptr = LOC(a)
74  call mpp_sum_ad( a1D, length, pelist )
75 
76  return
77  end subroutine MPP_SUM_4D_AD_
78 
79 !#######################################################################
80  subroutine MPP_SUM_5D_AD_( a, length, pelist )
81  MPP_TYPE_, intent(inout) :: a(:,:,:,:,:)
82  integer, intent(in) :: length
83  integer, intent(in), optional :: pelist(:)
84  MPP_TYPE_ :: a1D(length)
85 
86  pointer( ptr, a1D )
87  ptr = LOC(a)
88  call mpp_sum_ad( a1D, length, pelist )
89 
90  return
91  end subroutine MPP_SUM_5D_AD_
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version will
*f90 *************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************subroutine MPP_UPDATE_NEST_FINE_2D_(field, nest_domain, wbuffer, ebuffer, sbuffer, nbuffer, &flags, complete, position, extra_halo, name, tile_count) MPP_TYPE_, intent(in) ::field(:,:) type(nest_domain_type), intent(inout) ::nest_domain MPP_TYPE_, intent(inout) ::wbuffer(:,:) MPP_TYPE_, intent(inout) ::ebuffer(:,:) MPP_TYPE_, intent(inout) ::sbuffer(:,:) MPP_TYPE_, intent(inout) ::nbuffer(:,:) integer, intent(in), optional ::flags logical, intent(in), optional ::complete integer, intent(in), optional ::position integer, intent(in), optional ::extra_halo character(len= *), intent(in), optional ::name integer, intent(in), optional ::tile_count MPP_TYPE_ ::field3D(size(field, 1), size(field, 2), 1) MPP_TYPE_ ::wbuffer3D(size(wbuffer, 1), size(wbuffer, 2), 1) MPP_TYPE_ ::ebuffer3D(size(ebuffer, 1), size(ebuffer, 2), 1) MPP_TYPE_ ::sbuffer3D(size(sbuffer, 1), size(sbuffer, 2), 1) MPP_TYPE_ ::nbuffer3D(size(nbuffer, 1), size(nbuffer, 2), 1) pointer(ptr, field3D) pointer(ptr_w, wbuffer3D) pointer(ptr_e, ebuffer3D) pointer(ptr_s, sbuffer3D) pointer(ptr_n, nbuffer3D) ptr=LOC(field) ptr_w=LOC(wbuffer) ptr_e=LOC(ebuffer) ptr_s=LOC(sbuffer) ptr_n=LOC(nbuffer) call mpp_update_nest_fine(field3D, nest_domain, wbuffer3D, ebuffer3D, sbuffer3D, nbuffer3D, &flags, complete, position, extra_halo, name, tile_count) returnend subroutine MPP_UPDATE_NEST_FINE_2D_subroutine MPP_UPDATE_NEST_FINE_3D_(field, nest_domain, wbuffer, sbuffer, ebuffer, nbuffer, &flags, complete, position, extra_halo, name, tile_count) MPP_TYPE_, intent(in) ::field(:,:,:) type(nest_domain_type), intent(inout) ::nest_domain MPP_TYPE_, intent(inout) ::wbuffer(:,:,:) MPP_TYPE_, intent(inout) ::ebuffer(:,:,:) MPP_TYPE_, intent(inout) ::sbuffer(:,:,:) MPP_TYPE_, intent(inout) ::nbuffer(:,:,:) integer, intent(in), optional ::flags logical, intent(in), optional ::complete integer, intent(in), optional ::position integer, intent(in), optional ::extra_halo character(len= *), intent(in), optional ::name integer, intent(in), optional ::tile_count MPP_TYPE_ ::d_type type(nestSpec), pointer ::update=> set_mismatch integer ::tile update_position nbuffersz l_size integer
subroutine, public copy(self, rhs)
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT end
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible MPP_TYPE_
l_size ! loop over number of fields ke do je do ie to je n if(.NOT. d_comm%R_do_buf(list)) cycle from_pe
character(len=128) version
logical debug
Definition: mpp.F90:1297
l_size ! loop over number of fields ke do je do ie to is
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible intent(inout) MPP_BROADCAST length
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call mpp_error(FATAL, 'MPP_TRANSMIT:you cannot transmit to ANY_PE using MPI.') else if(to_pe.NE.NULL_PE) then !no other valid cases except NULL_PE call mpp_error(FATAL
logical function received(this, seqno)
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible intent(inout) a
integer, dimension(:), allocatable pelist
*f90 *************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If not