1 !***********************************************************************
     2 !*                   GNU Lesser General Public License
     4 !* This file 
is part of the GFDL Flexible Modeling System (FMS).
     6 !* FMS 
is free software: you can redistribute it and/or modify it under
     7 !* the terms of the GNU Lesser General Public License as published by
     8 !* the Free Software Foundation, either 
version 3 of the License, or (at
     9 !* your option) any later 
version.
    11 !* FMS 
is distributed in the hope that it 
will be useful, but WITHOUT
    12 !* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    13 !* FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    16 !* You should have 
received a copy of the GNU Lesser General Public
    17 !* License along with FMS.  If 
not, see <http:
    18 !***********************************************************************
    19     subroutine MPP_DO_REDISTRIBUTE_3D_( f_in, f_out, 
d_comm, d_type )
    21       type(DomainCommunicator2D), intent(in) :: 
d_comm    36       pointer( ptr, buffer )
    37       integer :: buffer_pos, wordlen, errunit
    46       ptr = LOC(mpp_domains_stack)
    47       wordlen = 
size(TRANSFER(buffer(1),mpp_domains_stack))
    52          if( .NOT. 
d_comm%R_do_buf(list) )cycle
    56          buffer_pos = buffer_pos + 
msgsize    62          if( .NOT. 
d_comm%S_do_buf(list) )cycle
    67          do l=1,l_size  ! loop over number of 
fields    73                     buffer(
pos) = field_in(
i,
j,
k)
    78          if( 
debug )write( errunit,* )'
PE', 
pe, ' to 
PE ', 
to_pe, '
is,
ie,
js,
je=', 
is, 
ie, 
js, 
je    84       call mpp_sync_self(
check=EVENT_RECV)
    90          if( .NOT. 
d_comm%R_do_buf(list) )cycle
    94          if( 
debug )write( errunit,* )'
PE', 
pe, ' from 
PE ', 
from_pe, '
is,
ie,
js,
je=', 
is, 
ie, 
js, 
je    96          do l=1,l_size  ! loop over number of in/
out fields   102                     field_out(
i,
j,
k) = buffer(
pos)
   111     end subroutine MPP_DO_REDISTRIBUTE_3D_
 ************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version will
 
*f90 *************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************subroutine MPP_UPDATE_NEST_FINE_2D_(field, nest_domain, wbuffer, ebuffer, sbuffer, nbuffer, &flags, complete, position, extra_halo, name, tile_count) MPP_TYPE_, intent(in) ::field(:,:) type(nest_domain_type), intent(inout) ::nest_domain MPP_TYPE_, intent(inout) ::wbuffer(:,:) MPP_TYPE_, intent(inout) ::ebuffer(:,:) MPP_TYPE_, intent(inout) ::sbuffer(:,:) MPP_TYPE_, intent(inout) ::nbuffer(:,:) integer, intent(in), optional ::flags logical, intent(in), optional ::complete integer, intent(in), optional ::position integer, intent(in), optional ::extra_halo character(len= *), intent(in), optional ::name integer, intent(in), optional ::tile_count MPP_TYPE_ ::field3D(size(field, 1), size(field, 2), 1) MPP_TYPE_ ::wbuffer3D(size(wbuffer, 1), size(wbuffer, 2), 1) MPP_TYPE_ ::ebuffer3D(size(ebuffer, 1), size(ebuffer, 2), 1) MPP_TYPE_ ::sbuffer3D(size(sbuffer, 1), size(sbuffer, 2), 1) MPP_TYPE_ ::nbuffer3D(size(nbuffer, 1), size(nbuffer, 2), 1) pointer(ptr, field3D) pointer(ptr_w, wbuffer3D) pointer(ptr_e, ebuffer3D) pointer(ptr_s, sbuffer3D) pointer(ptr_n, nbuffer3D) ptr=LOC(field) ptr_w=LOC(wbuffer) ptr_e=LOC(ebuffer) ptr_s=LOC(sbuffer) ptr_n=LOC(nbuffer) call mpp_update_nest_fine(field3D, nest_domain, wbuffer3D, ebuffer3D, sbuffer3D, nbuffer3D, &flags, complete, position, extra_halo, name, tile_count) returnend subroutine MPP_UPDATE_NEST_FINE_2D_subroutine MPP_UPDATE_NEST_FINE_3D_(field, nest_domain, wbuffer, sbuffer, ebuffer, nbuffer, &flags, complete, position, extra_halo, name, tile_count) MPP_TYPE_, intent(in) ::field(:,:,:) type(nest_domain_type), intent(inout) ::nest_domain MPP_TYPE_, intent(inout) ::wbuffer(:,:,:) MPP_TYPE_, intent(inout) ::ebuffer(:,:,:) MPP_TYPE_, intent(inout) ::sbuffer(:,:,:) MPP_TYPE_, intent(inout) ::nbuffer(:,:,:) integer, intent(in), optional ::flags logical, intent(in), optional ::complete integer, intent(in), optional ::position integer, intent(in), optional ::extra_halo character(len= *), intent(in), optional ::name integer, intent(in), optional ::tile_count MPP_TYPE_ ::d_type type(nestSpec), pointer ::update=> set_mismatch integer ::tile update_position nbuffersz l_size integer
 
l_size ! loop over number of fields ke do je do i
 
l_size ! loop over number of fields ke do je do ie to PE
 
character(len=1), parameter equal
 
l_size ! loop over number of fields ke do je do ie pe
 
subroutine, public copy(self, rhs)
 
from je l_size ! loop over number of in out fields ptr_field_out
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT end
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************subroutine MPP_DO_REDISTRIBUTE_3D_(f_in, f_out, d_comm, d_type) integer(LONG_KIND), intent(in) ::f_in(:), f_out(:) type(DomainCommunicator2D), intent(in) ::d_comm MPP_TYPE_, intent(in) ::d_type MPP_TYPE_ ::field_in(d_comm%domain_in%x(1)%data%begin:d_comm%domain_in%x(1)%data%end, &d_comm%domain_in%y(1)%data%begin:d_comm%domain_in%y(1)%data%end, d_comm%ke) pointer(ptr_field_in, field_in) MPP_TYPE_ ::field_out(d_comm%domain_out%x(1)%data%begin:d_comm%domain_out%x(1)%data%end, &d_comm%domain_out%y(1)%data%begin:d_comm%domain_out%y(1)%data%end, d_comm%ke) pointer(ptr_field_out, field_out) type(domain2D), pointer ::domain_in, domain_out integer ::i, j, k, l, n, l_size integer ::is, ie, js, je integer ::ke integer ::list, pos, msgsize integer ::to_pe, from_pe MPP_TYPE_ ::buffer(size(mpp_domains_stack(:))) pointer(ptr, buffer) integer ::buffer_pos, wordlen, errunit!fix ke errunit=stderr() l_size=size(f_out(:)) ! equal to size(f_in(:)) ke=d_comm%ke domain_in=> d_comm domain_in
 
type(field_mgr_type), dimension(max_fields), private fields
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible MPP_TYPE_
 
l_size ! loop over number of fields ke do j
 
l_size ! loop over number of fields ke do je do ie to je n if(.NOT. d_comm%R_do_buf(list)) cycle from_pe
 
l_size ! loop over number of fields ke do je do ie to to_pe
 
character(len=128) version
 
l_size ! loop over number of fields ke do je do ie to is
 
l_size ! loop over number of fields ke do je do ie to je msgsize
 
l_size ! loop over number of fields ptr_field_in
 
logical function received(this, seqno)
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************subroutine READ_RECORD_CORE_(unit, field, nwords, data, start, axsiz) integer, intent(in) ::unit type(fieldtype), intent(in) ::field integer, intent(in) ::nwords MPP_TYPE_, intent(inout) ::data(nwords) integer, intent(in) ::start(:), axsiz(:) integer(SHORT_KIND) ::i2vals(nwords)!rab used in conjunction with transfer intrinsic to determine size of a variable integer(KIND=1) ::one_byte(8) integer ::word_sz!#ifdef __sgi integer(INT_KIND) ::ivals(nwords) real(FLOAT_KIND) ::rvals(nwords)!#else! integer ::ivals(nwords)! real ::rvals(nwords)!#endif real(DOUBLE_KIND) ::r8vals(nwords) pointer(ptr1, i2vals) pointer(ptr2, ivals) pointer(ptr3, rvals) pointer(ptr4, r8vals) if(mpp_io_stack_size< nwords) call mpp_io_set_stack_size(nwords) call mpp_error(FATAL, 'MPP_READ currently requires use_netCDF option') end subroutine READ_RECORD_CORE_ subroutine READ_RECORD_(unit, field, nwords, data, time_level, domain, position, tile_count, start_in, axsiz_in)!routine that is finally called by all mpp_read routines to perform the read!a non-netCDF record contains:! field ID! a set of 4 coordinates(is:ie, js:je) giving the data subdomain! a timelevel and a timestamp(=NULLTIME if field is static)! 3D real data(stored as 1D)!if you are using direct access I/O, the RECL argument to OPEN must be large enough for the above!in a global direct access file, record position on PE is given by %record.!Treatment of timestamp:! We assume that static fields have been passed without a timestamp.! Here that is converted into a timestamp of NULLTIME.! For non-netCDF fields, field is treated no differently, but is written! with a timestamp of NULLTIME. There is no check in the code to prevent! the user from repeatedly writing a static field. integer, intent(in) ::unit, nwords type(fieldtype), intent(in) ::field MPP_TYPE_, intent(inout) ::data(nwords) integer, intent(in), optional ::time_level type(domain2D), intent(in), optional ::domain integer, intent(in), optional ::position, tile_count integer, intent(in), optional ::start_in(:), axsiz_in(:) integer, dimension(size(field%axes(:))) ::start, axsiz integer ::tlevel !, subdomain(4) integer ::i, error, is, ie, js, je, isg, ieg, jsg, jeg type(domain2d), pointer ::io_domain=> tlevel if(PRESENT(start_in) .AND. PRESENT(axsiz_in)) then if(size(start(! the data domain and compute domain must refer to the subdomain being passed ! In this ! since that attempts to gather all data on PE size(field%axes(:)) axsiz(i)
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible intent(inout) a
 
type(domaincommunicator2d), dimension(:), allocatable, target, save d_comm
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If not
 
l_size ! loop over number of fields ke do je do ie pos
 
l_size ! loop over number of fields ke do je do ie to js
 
************************************************************************GNU Lesser General Public License **This file is part of the GFDL Flexible Modeling System(FMS). ! *! *FMS is free software without even the implied warranty of MERCHANTABILITY or *FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License *for more details **You should have received a copy of the GNU Lesser General Public *License along with FMS If see< http:! ***********************************************************************!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! MPP_TRANSMIT !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! subroutine MPP_TRANSMIT_(put_data, put_len, to_pe, get_data, get_len, from_pe, block, tag, recv_request, send_request)!a message-passing routine intended to be reminiscent equally of both MPI and SHMEM!put_data and get_data are contiguous MPP_TYPE_ arrays!at each call, your put_data array is put to to_pe 's get_data! your get_data array is got from from_pe 's put_data!i.e we assume that typically(e.g updating halo regions) each PE performs a put _and_ a get!special PE designations:! NULL_PE:to disable a put or a get(e.g at boundaries)! ANY_PE:if remote PE for the put or get is to be unspecific! ALL_PES:broadcast and collect operations(collect not yet implemented)!ideally we would not pass length, but this f77-style call performs better(arrays passed by address, not descriptor)!further, this permits< length > contiguous words from an array of any rank to be passed(avoiding f90 rank conformance check)!caller is responsible for completion checks(mpp_sync_self) before and after integer, intent(in) ::put_len, to_pe, get_len, from_pe MPP_TYPE_, intent(in) ::put_data(*) MPP_TYPE_, intent(out) ::get_data(*) logical, intent(in), optional ::block integer, intent(in), optional ::tag integer, intent(out), optional ::recv_request, send_request logical ::block_comm integer ::i MPP_TYPE_, allocatable, save ::local_data(:) !local copy used by non-parallel code(no SHMEM or MPI) integer ::comm_tag integer ::rsize if(.NOT.module_is_initialized) call mpp_error(FATAL, 'MPP_TRANSMIT:You must first call mpp_init.') if(to_pe.EQ.NULL_PE .AND. from_pe.EQ.NULL_PE) return block_comm=.true. if(PRESENT(block)) block_comm=block if(debug) then call SYSTEM_CLOCK(tick) write(stdout_unit,'(a, i18, a, i6, a, 2i6, 2i8)')&'T=', tick, ' PE=', pe, ' MPP_TRANSMIT begin:to_pe, from_pe, put_len, get_len=', to_pe, from_pe, put_len, get_len end if comm_tag=DEFAULT_TAG if(present(tag)) comm_tag=tag!do put first and then get if(to_pe.GE.0 .AND. to_pe.LT.npes) then!use non-blocking sends if(debug .and.(current_clock.NE.0)) call SYSTEM_CLOCK(start_tick)!z1l:truly non-blocking send.! if(request(to_pe).NE.MPI_REQUEST_NULL) then !only one message from pe-> to_pe in queue *PE waiting for to_pe ! call error else get_len so only do gets but you cannot have a pure get with MPI call a get means do a wait to ensure put on remote PE is complete error call increase mpp_nml request_multiply call MPP_TRANSMIT get_len end if return end subroutine MPP_TRANSMIT_ ! MPP_BROADCAST ! subroutine but that doesn t allow !broadcast to a subset of PEs This version and mpp_transmit will remain !backward compatible intent(inout) MPP_BROADCAST begin